contents
 Overview      Standard Features      Systems      Options      TechSpecs line.gif (50 bytes)

Overview

Compaq AlphaServer DS20E
Compaq AlphaStation DS20E
 
1.
 Operator Control Panel
6.
 Ultra2/Ultra3 SCSI adapter
2.
 Removable media bay
7.
 System motherboard
3.
 Combination CD-ROM/floppy drive
8.
 CPU modules
4.
 Hard disk drive cage
9.
 Server Management Module
5.
 Power Supplies    

At A Glance
AlphaServer/AlphaStation DS20E Systems include:
  • Alpha 21264 667-MHz or 833-MHz processor (dual processor capability)
  • 8-MB level DDR cache per processor
  • ECC-protected memory bus and cache
  • 512-MB or 1-GB SDRAM memory expandable to 4 GB
  • Five PCI and one shared PCI/ISA slot (six total slots)
  • Six hot swap hard disk drive bays
  • Internal mass storage capacity up to 876 GB
  • Integrated environmental server management module
  • Two 375-Watt hot pluggable power supplies with optional third for N+1 redundancy
  • Combo 24X CD-ROM drive and 1.44-MB floppy disk drive
  • Protected by HP Services, including a three-year on-site limited warranty
contents
 Overview      Standard Features      Systems      Options      TechSpecs line.gif (50 bytes)

Standard Features
Processor Alpha 21264 667-MHz or 833-MHz processor
Cache Memory 8-MB level 2 dual data rate cache per processor
Upgradability System upgradable to dual processing
Memory Minimum 512-MB or 1-GB ECC SDRAM memory standard
Maximum 4 GB
Network Controller Choice of Ethernet controllers
Expansion I/O (Total) 6
PCI 5
Shared PCI/ISA 1
Storage Controller Choice of storage controllers
Storage Diskette Drive 1.44 MB
CD-ROM 24X Max IDE CD-ROM Drive
Internal Hard Drives Choice of 18.2-GB, 36.4-GB, 72.8-GB, or 146-GB drives
Maximum Internal Storage 876 GB
Interfaces Parallel 1
Serial 2
Pointing Device (Mouse) 1
Keyboard 1
SCSI knockouts on rear of chassis 6
Parallel 1
Form Factor Rackmount or Tower
Manageability Insight Manager
Power Supply Two 375-Watt hot plug power supplies, standard; optional third N+1 for redundancy
Hot plug redundant power supply support; hot plug fan support
OS Support AlphaServer DS20E Tru64 UNIX systems include pre-installed software (V5.1B), Base license, Unlimited User license, Server Extension license, Internet Express, and Secure Web Server
  AlphaStation DS20E Tru64 UNIX systems include pre-installed software (V5.1B), 2-user Base license
  AlphaServer DS20E OpenVMS systems include pre-installed software (V7.3-1), Base license with System Manager license, and Enterprise Integration Server License Package for OpenVMS V3.1
  AlphaStation DS20E OpenVMS systems include pre-installed software (V7.3-1), Base license, Concurrent Use
1-user license, and NAS 150 Client license
  Minimum OS support: Tru64 UNIX V4.0F, OpenVMS V7.1-2 or V7.2-1
Service and Support HP Services provides a wide range of service offerings including a three-year limited warranty fully supported by a worldwide network of resellers and service providers; lifetime toll-free 7 x 24 hardware technical phone support.
contents
 Overview      Standard Features      Systems      Options      TechSpecs line.gif (50 bytes)

Systems
Step 1 – Select system
AlphaServer/AlphaStation DS20E systems require the mandatory selection of the following items:
  • Pedestal/tower or rackmount bezel kit
  • Disk drive cage
  • LVD SCSI adapter
  • System disk drive
  • Ethernet adapter
  • Power cord
  • Software media and documentation for first system onsite
NOTES: DS20E minimum OS support - Tru64 UNIX V4.0F, OpenVMS V7.1-2 or V7.2-1
Keyboard and mouse not included.
 

AlphaServer DS20E Systems

OS

CPU

Memory/Cache
Order Number
Tru64 UNIX
667 MHz
512 MB/8 MB
DA-56PAB-EA
Tru64 UNIX
667 MHz
1 GB/8 MB
DA-56PAB-FA
Tru64 UNIX
833 MHz
512 MB/8 MB
DA-56RAA-EA
Tru64 UNIX
833 MHz
1 GB/8 MB
DA-56RAA-FA
 
OpenVMS
667 MHz
512 MB/8 MB
DY-56PAB-EA
OpenVMS
667 MHz
1 GB/8 MB
DY-56PAB-FA
OpenVMS
833 MHz
512 MB/8 MB
DY-56RAA-EA
OpenVMS
833 MHz
1 GB/8 MB
DY-56RAA-FA
 

AlphaStation DS20E Systems
Tru64 UNIX
667 MHz
512 MB/8 MB
DA-56PAB-EW
Tru64 UNIX
667 MHz
1 GB/8 MB
DA-56PAB-FW
Tru64 UNIX
833 MHz
512 MB/8 MB
DA-56RAA-EW
Tru64 UNIX
833 MHz
1 GB/8 MB
DA-56RAA-FW
 
OpenVMS
667 MHz
512 MB/8 MB
DY-56PAB-EW
OpenVMS
667 MHz
1 GB/8 MB
DY-56PAB-FW
OpenVMS
833 MHz
512 MB/8 MB
DY-56RAA-EW
OpenVMS
833 MHz
1 GB/8 MB
DY-56RAA-FW

 

Step 2 – Select Mandatory Options

Step 2a - Bezel Kits - Mandatory
  • Pedestal/Tower kit or Rackmount kit is mandatory for each system
  
  Pedestal/Tower bezel kit 3X-BA56P-PB
  Rackmount bezel kit (M-Series Cabinets) 3X-BA56R-RC
  Rackmount bezel kit for 9000 Series Cabinets (Onsite integration only – contact CustomSystems if factory integration is required) 3X-BA56R-RE

Step 2b - Disk Drive Cage - Mandatory
  • Systems support one disk drive cage; disk drive cage supports six 3.5-inch hard disk drives
  
  6-bay disk drive cage BA610-6D

Step 2c - SCSI Adapter - Mandatory
  • Selection of LVD SCSI adapter to connect to internal disk drive cage is mandatory; SCSI cable included with disk-drive cage
  
  Single-channel LVD adapter, maximum four per system 3X-KZPCA-AA
  PCI 2-channel multimode Ultra3 LVD SCSI adapter VHDCI (Tru64 UNIX 5.1 or higher and OpenVMS V7.2-2 or higher) 3X-KZPEA-DB
  NOTES:
  • Patch kit required, kit available at http://ftp1.support.compaq.com/public/Digital_UNIX/v5.1/
  • No shared bus support with OpenVMS. No shared tape/library support with OpenVMS or Tru64 UNIX. 3X-KZPEA-DB adapter supports shared bus using hard disk drives under Tru64 UNIX V5.1A with Patch Kit 4 or V5.1B with Patch Kit 1 and TruCluster V5.1A; supports maximum of two nodes per shared bus, requires
    3X-BN55A-01 Y-cable and connector plug assembly and 3X-H32CT-AA external LVD terminator per shared bus.
  • Refer to 3X-KZPEA-DB QuickSpecs for complete list of restrictions.
  
  PCI-to-10/100 MBPS Ethernet, graphics, LVD SCSI combination adapter, maximum one per system (cannot be installed in PCI slot 1) 3X-DEPVZ-AA
  PCI 1-channel Ultra2 LVD backplane RAID controller, 64-bit, 16-MB cache DS-KZPCC-AC
  NOTES:
  • Supported with BA610-6D, BA356, and DS-SL13R-xx or DS-SSL14-RX shelves only. When installed in BA356 shelves, part number DS-BA35X-FC is required for non-factory installations.
  • Graphics card is required to run the DS-KZPCC-AC console utilities (SMOR) with SRM console versions lower than V6.0 or, alternatively can be run via serial line and terminal emulation software for SRM V6.0 or higher. PB2GA-JC/JD graphics cards are not
    supported.
  • EV6 systems not supported.
  • Supported in platform part numbers: DA-56PAB-EA/FA/EW/FW and DA-56RAA-EA/FA/EW/FW.
  • Specific patches are required for specific versions of the operating system. See
    DS-KZPCC-AC/CE QuickSpecs for latest details and other configuration information.
    Tru64 UNIX V4.0F requires NHD3 and Patch Kit 4 (BL15) or later
    Tru64 UNIX V5.1 requires Patch Kit 3 (BL17) and Early Release Patch C462
    Patch Kit 3 (BL17) is located at:
    T64V5117-C0046202-11060-Manual-ER-20010615.tar
    Patch C462.02 is located at:
    http://ftp1.support.compaq.com/public/unix/v5.1/
  • DS-KZPCC-AC/CE RAID controllers support standalone and cluster configurations; no support as boot device or primary device in cluster configurations; TruCluster V5.1 (restricted to non-shared buses only)
  
  PCI 3-channel Ultra2 LVD RAID controller, 64-bit, 64-MB cache DS-KZPCC-CE
  NOTES:
  • Supported with BA610-6D, BA356 and DS-SL13R-xx or DS-SSL14-RX shelves only. When installed in BA356 shelves, part number DS-BA35X-FC is required for non-factory installations.
  • Graphics card is required to run the DS-KZPCC-AC console utilities (SMOR) with SRM console versions lower than V6.0 or, alternatively can be run via serial line and terminal emulation software for SRM V6.0 or higher. PB2GA-JC/JD graphics cards are not supported.
  • EV6 systems not supported.
  • Supported in platform part numbers: DA-56PAB-EA/FA/EW/FW and DA-56RAA-EA/FA/EW/FW.
  • Specific patches are required for specific versions of the operating system. See
    DS-KZPCC-AC/CE QuickSpecs for latest details and other configuration information. Tru64 UNIX V4.0F requires NHD3 and Patch Kit 4 (BL15) or later.
    Tru64 UNIX V5.1 requires Patch Kit 3 (BL17) and Early Release Patch C462.
    Patch Kit 3 (BL17) is located at:
    T64V5117-C0046202-11060-Manual-ER-20010615.tar
    Patch C462.02 is located at:
    http://ftp1.support.compaq.com/public/unix/v5.1/
  • DS-KZPCC-AC/CE RAID controllers support standalone and cluster configurations; no support as boot device or primary device in cluster configurations; TruCluster V5.1 (restricted to non-shared buses only)
  
  PCI 2-channel Ultra160 SCSI backplane RAID controller with 128-MB cache requires use of Ultra160 SCSI cables (uses one PCI slot); requires connection to BA610-6D disk card cage or DS-SL13R-xx Universal StorageWorks shelf. 3X-KZPDC-BE
  NOTES:  
  PCI 4-channel Ultra160 SCSI backplane RAID controller, 256-MB cache, ADG Standard, requires use of Ultra160 SCSI cables (uses one PCI slot); requires connection to BA610-6D disk card cage or DS-SL13R-xx Universal StorageWorks shelf 3X-KZPDC-DF
  NOTES:  

Step 2d - System Disk Drive (Supported in Disk Drive Cage) - Mandatory
  • Selection of one disk drive is mandatory
  
  18.2-GB Ultra320 SCSI 15,000 rpm 1-inch Universal disk drive 3R-A3848-AA
  36.4-GB Ultra320 SCSI 10,000 rpm 1-inch Universal disk drive 3R-A3838-AA
  36.4-GB Ultra320 SCSI 15,000 rpm 1-inch Universal disk drive 3R-A3849-AA
  72.8-GB Ultra320 SCSI 10,000 rpm 1-inch Universal disk drive 3R-A3839-AA
  72.8-GB Ultra320 SCSI 15,000 rpm 1-inch Universal disk drive 3R-A3851-AA
  146-GB Ultra320 SCSI 10,000 rpm 1-inch Universal disk drive 3R-A3841-AA
  Ultra Universal drive height converter, 4-pack; required for installed base customers with earlier 4-slot drive cages (3X-BA611-4D) when ordering 1-inch Universal drives 3R-A0528-AA

Step 2e - Ethernet Adapters - Mandatory
  • Selection of one Ethernet adapter is mandatory (Ethernet adapter is not required if KZPCM or 3X-DEPVZ-AA adapter is selected)
  • See Step 14 for additional networking options
  
  Single-port 100 Mbps (MMF/duplex-SC) add-on daughter card for use with the
3X-DE602-BB. The combined 3X-DE602-BB and 3X-DE602-FA provides two 10/100 (UTP/RJ45s) and one 100Mbps (MMF/SC) ports in a single PCI slot option. Maximum two per system, maximum eight 10/100 Ethernet ports per system.
NOTE: 3X-DE602-FA cannot be used standalone.
Use BN34A or BN34B cables.		 3X-DE602-FA
  PCI (32/64-bit, 33-MHz to 66-MHz) dual-port 10/100 Ethernet (UTP/RJ45s) NIC and Base Module. (One 3X-DE602-TA or 3X-DE602-FA optional add-on daughter card can be combined with this module.) Maximum two per system, maximum eight 10/100 Ethernet ports per system.
Use BN25G, BN26M, BN24Q, or BN28Q twisted pair RJ45 cables.		 3X-DE602-BB
  Dual-port 10/100 Ethernet (UTP/RJ45) add-on daughter card for use with the
3X-DE602-BB only. The combined 3X-DE602-BB and 3X-DE602-TA modules provide four 10/100 (UTP/RJ45s) ports in a single PCI slot option; allows for a maximum of 16 ports per system. Maximum two per system, maximum eight 10/100 Ethernet ports per system.		 3X-DE602-TA
  NOTES: 3X-DE602-TA cannot be used standalone.
OpenVMS V7.3 requires Tima Kit: DEC-AXPVMS-VMS73_LAN-V0100—4.PCSI
Use BN25G, BN26M, BN24Q, or BN28Q twisted pair RJ45 cables.		  
  Cable for 10BaseT twisted pair connection BN25G-xx

Step 2f - Power Cords - Mandatory
  • Selection of one power cord is mandatory for all systems.
  
Pedestal Power Cords North America, 120V, 75-inch
BN26J-1K
North America, 200 to 240V, 75-inch
BN18J-1K
Australia, New Zealand, 2.5-meter (103541-511)
BN19H-2E
Central Europe, 2.5-meter
BN19C-2E
Denmark, 2.5-meter (103541-481)
BN19K-2E
Egypt, India, South Africa, 2.5-meter (103541-AR1)
BN19S-2E
Israel, 2.5-meter
BN18L-2E
Italy, 2.5-meter (103541-461)
BN19M-2E
Japan, 2.5-meter
3X-BN46F-02
Switzerland, 2.5-meter (103541-511)
BN19E-2E
UK, Ireland, 2.5-meter
BN19A-2E
Rackmount Power Cords U.S./Canada
BN20Z-4E
Non-U.S.
BN35S-4E
Japan, 2.5-meter
3X-BN46D-4E
contents
 Overview      Standard Features      Systems      Options      TechSpecs line.gif (50 bytes)

Options

Step 3 - Additional CPU Modules - Optional
  • One 6/667-MHz or 6/833-MHz CPU included, one additional CPU supported, second CPU must be the same speed.
  
  SMP upgrade includes one 6/667-MHz CPU with 8-MB cache and Tru64 UNIX SMP license KN311-CB
  SMP upgrade includes one 6/667-MHz CPU with 8-MB cache and OpenVMS SMP license KN311-CC
  SMP upgrade includes one 6/833-MHz CPU with 8-MB cache and Tru64 UNIX SMP license KN312-BB
  SMP upgrade includes one 6/833-MHz CPU with 8-MB cache and OpenVMS SMP license KN312-BC

Step 4 - Memory - Optional
  • System includes one memory option; up to three additional memory options can be added
  
  512-MB memory option (4 x 128-MB DIMMs) MS340-DA
  1-GB memory option (4 x 256-MB DIMMs) MS340-EA

Step 5 - Additional Power Supplies - Optional
  • Two 375 watt power supplies included with system; optional third power supply provides N+1 redundancy
  
  DS20E redundant power supply FR-H7910-AA

Step 6 - Internal Removable Storage - Optional
  • System supports three internal removable media devices:
  • One combo 24X CD-ROM drive and 1.44-MB disk drive
  • One additional removable media slot provides support for one 5.25-inch half-height device; requires SCSI adapter and SCSI cable 3X-BC56C-2F
  • For optimum performance it is recommended that Ultra2 capable devices be connected to at least one Ultra2 capable adapter.
  
  DAT 12/24-GB 4 mm SCSI tape drive (TLZ10) 5.25-inch half-height, top gun blue; requires single-ended UltraSCSI or Ultra2 adapter (3X-DEPVZ-AA, 3X-KZPCA-AA,
3X-KZPEA-DB, or KZPCM-DA)		 TLZ10-LB
  DAT 5.25-inch half-height 20/40-GB 4 mm Ultra2 (LVD) SCSI tape drive, top gun blue; requires Ultra2/Ultra3 (LVD) adapter (3X-KZPCA-AA, 3X-DEPVZ-AA, or
3X-KZPEA-DB)
 3X-SD20X-LB
  DAT 40-GB LVD internal tape drive (Q1553A) 3R-A4752-AA
  DAT 36/72-GB 4-mm 5.25-inch half-height LVD SCSI tape drive, carbon black; (Q1525A) 3R-A4544-AA
  AIT 5.25-inch half-height 35/70-GB 8 mm Wide UltraSCSI tape drive, top gun blue; requires single-ended UltraSCSI adapter or Ultra2/Ultra3 adapter (KZPBA-CA, 3X-DEPVZ-AA, KZPCM-DA, 3X-KZPCA-AA, or 3X-KZPEA-DB) 3X-SZ35X-LB
  AIT 5.25-inch half-height 50/100-GB 8 mm Ultra2 (LVD) SCSI tape drive, top gun blue; requires Ultra2/Ultra3 (LVD) adapter (3X-KZPCA-AA, 3X-DEPVZ-AA, or
3X-KZPEA-DB)
 3X-SZ50X-LB
  AIT 5.25-inch half-height 35/70-GB 8 mm LVD UltraSCSI tape drive, carbon black; requires Ultra2/Ultra3 (LVD) adapter (3X-KZPCA-AA, 3X-DEPVZ-AA, or 3X-KZPEA-DB) and SCSI cable 3R-A2392-AA
  AIT 5.25-inch half-height 100/200-GB 8-mm Ultra3 SCSI tape drive, carbon black; requires Ultra2/Ultra3 (LVD) adapter (3X-KZPCA-AA, 3X-DEPVZ-AA, or 3X-KZPEA-DB) 3R-A3623-AA
  AIT 35/70-GB hot-plug LVD Universal tape drive, uses two slots in BA610-6D or 43xxx shelves, requires 3X-KZPCA-AA, 3X-DEPVZ-AA LVD, or 3X-KZPEA-DB adapter 3R-A2396-AA
  AIT 50/100-GB hot plug LVD Universal tape drive, uses two slots in BA610-6D or 43xxx shelves, requires 3X-KZPCA-AA, 3X-DEPVZ-AA LVD, or 3X-KZPEA-DB adapter 3R-A2779-AA
  AIT 100/200-GB hot plug LVD Universal tape drive, uses two slots in BA610-6D or 43xxx shelves; requires 3X-DEPVZ-AA, 3X-KZPEA-DB, or 3X-KZPCA-AA adapter 3R-A3621-AA
  DAT 20/40-GB DDS4 hot plug LVD Universal tape drive, uses two slots in BA610-6D or 43xxx shelves, requires 3X-KZPCA-AA LVD, or 3X-KZPEA-DB adapter 3R-A2780-AA
  SCSI cable with one connector and active terminator to connect optional PCI adapter to 5.25-inch device 3X-BC56C-2F

Step 7 - External Storage - Optional
StorageWorks Model 4314R and Model 4354R Universal Drive Shelves  
  • StorageWorks Model 4314R and 4354R Ultra3 SCSI (LVD) single-bus and split-bus Universal drive shelves; refer to StorageWorks Enclosure 4300 Family QuickSpecs when configuring shelves. When selecting a DS-SL13R-xx split-bus shelf, order two 3X-KZPCA-AA adapters with BN38C-xx cables, or one 3X-KZPEA-DB with BN37A-xx cables. Model 43xx shelves are compatible with Wide Ultra2 or Ultra3 (LVD) adapters only. Note that the depth of a DS-SL13R-xx shelf does not allow front and rear mounting. 3X-KZPEA-DB adapter does not support shared tapes/libraries
  
  StorageWorks Model 4314R Ultra3 SCSI (LVD) single-bus Universal drive rackmount shelf for North America and International use, except Japan (190209-001) DS-SL13R-AA
  StorageWorks Model 4314R Ultra3 SCSI (LVD) single-bus Universal drive rackmount shelf, Japan (190209-291) DS-SL13R-AJ
  StorageWorks Model 4354R Ultra3 SCSI (LVD) split-bus Universal drive rackmount shelf for North America and International use, except Japan (190211-001) DS-SL13R-BA
  StorageWorks Model 4354R Ultra3 SCSI (LVD) split-bus Universal drive rackmount shelf, Japan (190211-291) DS-SL13R-BJ
StorageWorks Model 4314T Standalone Enclosure for Universal Drives Model 4314T Ultra3 SCSI, single-bus tower enclosure, U.S. (190210-001)
DS-SL13T-AA
Model 4314T Ultra3 SCSI, single-bus tower enclosure, International (190210-B31)
DS-SL13T-AB
Model 4314T Ultra3 SCSI, single-bus tower enclosure, Japan (190210-291)
DS-SL13T-AJ
StorageWorks Model 4314 Options StorageWorks enclosure redundant power supply (119826-B21)
DS-SE2UP-AA

Step 8 - Storage Devices - Optional
Disk Drives
(Supported in Model 4314R, Model 4354R, or Model 4314T Universal Drive Shelves)		 18.2-GB Ultra320 SCSI 15,000 rpm 1-inch Universal disk drive
3R-A3848-AA
36.4-GB Ultra320 SCSI 10,000 rpm 1-inch Universal disk drive
3R-A3838-AA
36.4-GB Ultra320 SCSI 15,000 rpm 1-inch Universal disk drive
3R-A3849-AA
72.8-GB Ultra320 SCSI 10,000 rpm 1-inch Universal disk drive
3R-A3839-AA
72.8-GB Ultra320 SCSI 15,000 rpm 1-inch Universal disk drive
3R-A3851-AA
146-GB Ultra320 SCSI 10,000 rpm 1-inch Universal disk drive
3R-A3841-AA
AIT Tape Drives (Internal) AIT 5.25-inch half-height 35/70-GB 8-mm Wide UltraSCSI tape drive, top gun blue; requires single ended UltraSCSI adapter or Ultra2 adapter (3X-DEPVZ-AA, KZPCM-DA, or 3X-KZPCA-AA) and SCSI cable (3X-BC56C-2F)
3X-SZ35X-LB
AIT 5.25-inch half-height 50/100-GB 8-mm Ultra2 (LVD) SCSI tape drive, top gun blue; requires Ultra2 (LVD) adapter and SCSI cable (3X-BC56C-2F)
3X-SZ50X-LB
AIT Tabletop Tape Drives AIT 35/70-GB 8-mm LVD tabletop tape drive, North America carbon black; requires LVD adapter
216885-001
Same as above, International
216885-B31
Same as above, Japan
216885-291
AIT 50/100-GB 8-mm SCSI tabletop tape drive with 120V North America power cord, carbon black; requires Ultra2 (LVD) adapter
157767-002
Same as above, International
157767-B32
Same as above, Japan
157767-292
AIT 100/200-GB 8-mm SCSI tabletop tape drive with 120V North America power cord
249160-001
Same as above, International
249160-B31
AIT Hot-plug Tape Drives
  • AIT hot-plug tape drives require two Universal slots
  
AIT 35/70-GB hot-plug LVD Universal tape drive, uses two slots in BA610-6D or 43xxx shelves
3R-A2396-AA
AIT 50/100-GB hot-plug LVD Universal tape drive, uses two slots in BA610-6D or 43xxx shelves
3R-A2779-AA
AIT 100/200-GB hot plug LVD Universal tape drive, uses two slots in BA610-6D or 43xxx shelves; supported with 3X-DEPVZ-AA, 3X-KZPEA-DB, and 3X-KZPCA-AA adapters
3R-A3621-AA
AIT Autoloaders AIT 35-GB tabletop autoloader, 8 cartridge, U.S.
292355-001
Same as above, International
292355-B31
AIT 35-GB rackmount autoloader, 8 cartridge, U.S.
280349-001
Same as above, International
280349-B31
AIT Rail kit for rackmount autoloader
284930-001
AIT Tape Libraries SSL2020 AIT tabletop library with one AIT 50-GB drive and 20 slots, LVD
175195-B21
SSL2020 AIT tabletop library with two AIT 50-GB drives and 20 slots, LVD
175195-B22
SSL2020 AIT rackmount library with one AIT 50-GB drive and 20 slots, LVD
175196-B21
SSL2020 AIT rackmount library with two AIT 50-GB drives and 20 slots, LVD
175196-B22
DAT Tape Drives (Internal) DAT 12/24-GB 4-mm 5.25-inch half-height SCSI tape drive, top gun blue; requires single-ended UltraSCSI or Ultra2 adapter (KZPBA-CA, 3X-DEPVZ-AA, 3X-KZPCA-AA, 3X-KZPEA-DB, or KZPCM-DA) and SCSI cable (3X-BC56C-2F)
TLZ10-LB
DAT 20/40-GB 4-mm 5.25-inch half-height Ultra2 (LVD) SCSI tape drive, top gun blue; requires Ultra2 (LVD) adapter and SCSI cable (3X-BC56C-2F)
3X-SD20X-LB
  DAT 36/72-GB 4-mm 5.25-inch half-height LVD SCSI tape drive, carbon black; (Q1525A); OpenVMS only
3R-A4544-AA
DAT Tabletop Tape Drives DAT 20/40-GB 4-mm Wide Ultra2 (LVD) tabletop SCSI tape drive with 120V North America power cord, carbon black; requires Ultra2 (LVD) adapter
157770-002
Same as above, International
157770-B32
Same as above, Japan
157770-292
DAT 40-GB LVD tabletop tape drive with North America power cord (Q1554A)
3R-A4753-AA
Same as above, International (Q1555A)
3R-A4754-AA
DAT 36/72-GB LVD tabletop SSI tape drive with 120V North America power cord, carbon black (Q1527A)
3R-A4545-AA
  Same as above, International (Q1528A)
3R-A4546-AA
DAT Hot-plug Tape Drive DAT 20/40-GB DDS4 hot-plug LVD Universal tape drive, uses two slots in BA610-6D or 43xxx shelves
3R-A2780-AA
  DAT 40-GB hot-plug LVD tape drive (Q1546A)
3R-A4745-AA
  DAT 36/72-GB hot-plug LVD Universal tape drive, carbon black; uses two slots in BA610-6D or 43xxx storage shelves
3R-A4547-AA
DAT Autoloaders DAT 20/40-GB auto loader external; requires BN31W-xx SCSI cable and
3X-KZPCA-AA, or 3X-DEPVZ-AA adapter, North America
166505-001
  Same as above, International
166505-B31
  Same as above, Japan
166505-291
DLT/SDLT Tabletop Tape Drives NOTE: 3X-KZPEA-DB does not support shared tapes/libraries.
  DLT8000 tabletop 40/80-GB DLT external tape drive, carbon black - requires
3X-KZPCA-AA LVD adapter - U.S.
146197-B23
  Same as above – Japan
146197-293
  SDLT tabletop 110/220-GB external tape drive, carbon black- requires 3X-KZPCA-AA or 3X-KZPEA-DB LVD adapter - U.S.
192103-002
  Same as above – International
192103-B32
  Same as above – Japan
192103-293
  SDLT tabletop 160/320-GB external tape drive, carbon black - requires 3X-KZPCA-AA or 3X-KZPEA-DB LVD adapter - U.S.
257319-001
  Same as above - International
257319-B31
  Same as above - Japan
257319-291
Ultrium Tabletop Tape Drives Ultrium 460 tabletop tape drive, four per system, two per SCSI bus, U.S.
Supported with 3X-KZPEA-xx, KZPCA-xx, and DEPVZ SCSI adapters only.
Ultrium 460 tape drives are cluster friendly devices, but cannot be shared by cluster members.
Tru64 UNIX V5.1A, requires Patch Kit 4: T64V51AB21AS0004-20030206.tar
Tru64 UNIX V5.1B, requires Patch Kit 1: T64v51bb03as0001-20021229.tar
Q1519A
  Ultrium 460 tabletop tape drive, same as above, International
Q1520A
DLT/SDLT Tape Libraries NOTE: 3X-KZPEA-DB does not support shared tapes/libraries.  
Rackmount kit for H9Axx M-Series cabinets – required for mounting MSL5000 series in M-Series cabinets
254795-001
  MSL5026DLX, DLT tabletop library with one 40/80-GB DLT tape drive, LVD
231821-B21
  MSL5026DLX, DLT tabletop library with two 40/80-GB DLT tape drives, LVD
231821-B22
  MSL5026DLX or MSL5026SL, DLT/SDLT rackmount library, 0 drives – requires rackmount kit (254795-001)
231979-B21
  MSL5026DLX, DLT rackmount library with one 40/80-GB DLT tape drive, LVD – requires rackmount kit (254795-001)
231891-B21
  MSL5026DLX, DLT rackmount library with two 40/80-GB DLT tape drives, LVD – requires rackmount kit (254795-001)
231891-B22
     
  MSL5026SL, SDLT tabletop library with one 110/220-GB SDLT tape drive, LVD
231822-B21
  MSL5026SL, SDLT tabletop library with two 110/220-GB SDLT tape drives, LVD
231822-B22
  MSL5026SL, SDLT rackmount library with one 110/220-GB SDLT tape drive, LVD – requires rackmount kit (254795-001)
231892-B21
  MSL5026SL, SDLT rackmount library with two 110/220-GB SDLT tape drives, LVD – requires rackmount kit (254795-001)
231892-B22
  MSL5026SL, SDLT tabletop library with one 110/220-GB SDLT tape drive, LVD (Graphite)
302511-B21
  MSL5026SL, SDLT tabletop library with two 110/220-GB SDLT tape drives, LVD (Graphite)
302511-B22
  MSL5026SL, SDLT rackmount library with one 110/220-GB SDLT tape drive, LVD (Graphite)
302512-B21
  MSL5026SL, SDLT rackmount library with two 110/220-GB SDLT tape drives, LVD (Graphite)
302512-B22
     
  MSL5026S2, SDLT2 tabletop library with one 160/320-GB SDLT tape drive, LVD
293473-B21
  MSL5026S2, SDLT2 tabletop library with two 160/320-GB SDLT tape drives, LVD
293473-B22
  MSL5026S2 SDLT rackmount library, 0 drives, LVD – requires rackmount kit (254795-001)
293472-B21
  MSL5026S2, SDLT2 rackmount library with one 160/320-GB SDLT tape drive, LVD
293472-B22
  MSL5026S2, SDLT2 rackmount library with two 160/320-GB SDLT tape drive, LVD
293472-B23
  MSL5026S2, SDLT2 rackmount library with one 160/320-GB SDLT tape drive with Fibre Channel, LVD
293472-B24
  MSL5026S2, SDLT2 rackmount library with two 160/320-GB SDLT tape drive with Fibre Channel, LVD
293472-B25
   
  MSL5052, 0 drives, LVD, rackmount
255102-B21
  MSL5052SL SDLT tabletop library with two 110/220-GB drives, LVD
249490-B21
  MSL5052SL SDLT rackmount library with two 110/220-GB drives, LVD – requires rackmount kit (254795-001)
249491-B21
  MSL5052SL SDLT 110/220-GB drive field upgrade, LVD
231823-B22
  MSL5052S2, SDLT2 tabletop library with two 160/320-GB SDLT tape drives, LVD, graphite
293476-B21
  MSL5052S2, SDLT2 rackmount library with two 160/320-GB SDLT tape drive, LVD
293474-B21
  MSL5052S2, SDLT2 rackmount library with two 160/320-GB SDLT tape drive with Fibre Channel, LVD
293474-B24
     
  NOTE: The following options are supported with 3X-KZPCA-AA or 3X-KZPEA-DB LVD adapters.
 
  MSL6000 with LTO Gen2 Tape Libraries
 
  MSL6000 LTO Gen2 add-on drive
330729-B21
  MSL6030 with 0 drives, LTO, LVDS, rackmount
330731-B21
  MSL6030 with one drive, LTO2, LVDS, rackmount
330731-B22
  MSL6030 with two drives, LTO2, LVDS, rackmount
330731-B23
  MSL6030 with one drive, LTO2, Fibre, rackmount
330731-B24
  MSL6030 with two drives, LTO2, Fibre, rackmount
330731-B25
  MSL6030 with one drive, LTO2, LVDS, tabletop
330788-B21
  MSL6030 with two drives, LTO2, LVDS, tabletop
330788-B22
  MSL6060 with 0 drives, LTO, LVDS, rackmount
331196-B23
  MSL6060 with two drives, LTO2, LVDS, rackmount
331196-B21
  MSL6060 with two drives, LTO2, Fibre, rackmount
331196-B22
  MSL6060 with two drives, LTO2, LVDS, tabletop
331195-B21
     
  ESL9322S2 SDLT2 tape library, two 160/320GB SDLT tape drives, 222 slots - requires 3X-KZPCA-AA adapter
293409-B22
  ESL9322S2 SDLT2 tape library, eight 160/320GB SDLT tape drives, 222 slots - requires 3X-KZPCA-AA adapter
293409-B28
  ESL9322S2 SDLT2 tape library, two 160/320GB SDLT tape drives, 322 slots - requires 3X-KZPCA-AA adapter
293410-B22
  ESL9322S2 SDLT2 tape library, eight 160/320GB SDLT tape drives, 322 slots - requires 3X-KZPCA-AA adapter
293410-B28
     
  ESL9326SL SDLT tape library with six 110/220-GB SDLT tape drives, LVD
234615-B21
  ESL9326SL SDLT tape library with eight 110/220-GB SDLT tape drives, LVD
234615-B22
  ESL9326SL SDLT tape library with 16 110/220-GB SDLT tape drives, LVD
234615-B26
     
  NOTE: The following options are supported with 3X-KZPCA-AA or 3X-KZPEA-DB LVD adapters.
  
  ESL9000 with LTO Gen2 Tape Libraries
  
  ESL 9322 library with 0 drives
330832-B21
  ESL 9595 library with 0 drives
330833-B21
  ESL 9000 Ultrium 460 drive upgrade kit
330834-B21
  ESL 9000 SDLT 110 drive upgrade kit
330837-B21
  ESL 9322 222 to 322 slot upgrade kit
330840-B21
  ESL 9000 5-MB memory module
330841-B21
  ESL 9595 400 to 500 slot upgrade kit
330842-B21
  ESL 9595 500 to 595 slot upgrade kit
330842-B22
  ESL 9595 400 to 595 slot upgrade kit
330842-B23
3U Rackmount Tape Drive Enclosure 3U LVD Rackmount Tape Drive Enclosure for use in H9Axx M-Series Cabinets, 0 drives, carbon black,
274338-B21
  Rackmount Kit for H9Axx Series Cabinets, carbon black – required for mounting 3U Rackmount Tape Drive Enclosure in M-Series cabinet
3R-A3804-AA
  NOTE: The 3U Tape Drive Enclosure supports up to four internal half-height removable devices, or up to two full height devices. Select up to four AIT or DAT devices, or two DLT/SDLT devices with 3U Rackmount Tape Drive Enclosure (274338-B21), or select preconfigured configurations listed below.
  AIT 35/70-GB 3U tape drive, requires 3X-KZPCA-AA LVD adapter, carbon black
216884-B21
  AIT 50/100-GB 3U tape drive, requires 3X-KZPCA-AA LVD adapter, carbon black (157766-B22)
3R-A3753-AA
  DAT 20/40-GB 3U tape drive, requires 3X-KZPCA-AA LVD adapter, carbon black (157769-B22)
3R-A3752-AA
  DLT8000 40/80-GB tape drive, requires 3X-KZPCA-AA LVD adapter
146196-B22
  SDLT 110/220-GB tape drive, requires 3X-KZPCA-AA or 3X-KZPEA-DB LVD adapter
192106-B25
  SDLT 160/320-GB tape drive, requires 3X-KZPCA-AA or 3X-KZPEA-DB LVD adapter, carbon black
257319-B21
   
  Ultrium 460 tape drive, requires 3X-KZPEA-xx, KZPCA-xx, or DEPVZ SCSI adapter, carbon black
Tru64 UNIX V5.1A requires Patch Kit 4: T64V51AB21AS0004-20030206.tar
Tru64 UNIX V.1B requires Patch Kit 1: T64v51bb03as0001-20021229.tar
OpenVMS: minimum V7.2-2
Q1518A
     
  Preconfigured Configurations
  AIT 50-GB 3U rackmount kit, carbon black
274333-B21
  DLT 40/80-GB, 3U rackmount kit, carbon black
274332-B21
  DLT 40/80-GB, dual-drive, 3U rackmount kit, carbon black
274335-B21
  SDLT 110/220-GB, 3U rackmount kit, carbon black
274331-B21
  SDLT 110/220-GB, dual-drive, 3U rackmount kit, carbon black
274334-B21
5U Rackmount Tape Drive Enclosure 5U LVD Rackmount Tape Drive Enclosure, carbon black, for use in H9Axx M-Series Cabinets, 0 drives
274339-B21
  Rackmount Kit for H9Axx Series Cabinets, carbon black - required for mounting 5U Rackmount Tape Drive Enclosure in M-Series cabinet
254795-001
  NOTE: The 5U Rackmount Tape Drive Enclosure supports four full-height devices; select up to four DLT or SDLT devices with 274339-B21, or select preconfigured configurations listed below.
  DLT8000 40/80-GB tape drive, requires 3X-KZPCA-AA LVD adapter, carbon black
146196-B22
  SDLT 110/220-GB tape drive, requires 3X-KZPCA-AA or 3X-KZPEA-DB LVD adapter, carbon black
192106-B25
  SDLT 160/320-GB tape drive, requires 3X-KZPCA-AA or 3X-KZPEA-DB LVD adapter, carbon black
257319-B21
     
  Preconfigured Configurations  
  SDLT 110/220-GB Tape Array III, 5U rackmount kit, carbon black
274336-B21
  DLT 40/80-GB Tape Array III, 5U rackmount kit, carbon black
274337-B21
  DLT Tape Array III Model 0 enclosure, U.S.
168047-001
  Same as above, International
168047-B31
  Same as above, Japan
168047-291
Network Storage Routers NOTE: The following Network Storage Routers are supported with MSL5000 and ELS9000 tape libraries:
  
  NSR e1200-160 one Fibre Channel x two LVD FC to SCSI Data Router, Tru64 UNIX and OpenVMS, graphite (330728-B21)
330728-B21
  NSR e2400 two Fibre Channel x two LVD FC to SCSI Data Router with card cage, Tru64 UNIX and OpenVMS, carbon black (262665-B21)
3R-A3935-AA
  NSR e2400 two Fibre Channel x four LVD FC to SCSI Data Router with no card cage, Tru64 UNIX and OpenVMS, carbon black (262664-B21)
3R-A3745-AA
  NSR N1200 one Fibre Channel x two LVD FC to SCSI Data Router, Tru64 UNIX and OpenVMS, supports tape drives and tape libraries (280823-B21)
3R-A3747-AA
  NSR m2402 two Fibre Channel x four LVD FC to SCSI Data Router, Tru64 UNIX and OpenVMS (262653-B21)
3R-A3740-AA
  NSR m2402 two Fibre Channel x four HVD FC to SCSI Data Router, Tru64 UNIX and OpenVMS (262654-B21)
3R-A3741-AA
UltraSCSI Hubs UltraSCSI hub with three differential ports, no single-ended ports, consists of two host ports and one storage port in 3.5-inch SBB, UltraSCSI cables not included
DS-DWZZH-03
  UltraSCSI hub with five differential ports, no single-ended ports, consists of four host ports and one storage port in 3.5-inch SBB, UltraSCSI cables not included
DS-DWZZH-05
StorageWorks Fibre Channel Switches NOTE: For more information on the following switches, refer to http://www.compaq.com/products/quickspecs/10457_na/10457_na.html  
  Fibre Channel SAN switch, 8 ports, 2 Gb, EL with Fabric Operating Software
(322120-B21)
DS-DSGGD-BC
  Fibre Channel SAN switch, 8 ports, 2 Gb, Power Pack, with Fabric Operating Software (322121-B21)
DS-DSGGD-CC
  Fibre Channel SAN Switch, 16 ports, 2 Gb, Base with Fabric Operating Software (322118-B21)
DS-DSGGD-CA
  Fibre Channel SAN switch, 16 ports, 2 Gb, Power Pack, with Fabric Operating Software (322119-B21)
DS-DSGGD-CB
  Fibre Channel SAN Switch, 32 ports, 2 Gb, Base with Fabric Operating Software (240603-B21)
DS-DSGGD-AB
  Fibre Channel SAN Switch, 32 ports, 2 Gb, Power Pack with Fabric Operating Software (333764-B21)
DS-DSGGD-DB
  Fibre Channel SAN Switch, 64 ports, 2 Gb, Base with Fabric Operating Software (332177-B21)
DS-DSGGE-BA
  Fibre Channel SAN Switch, 64 ports, 2 Gb, Power Pack with Fabric Operating Software (332178-B21)
DS-DSGGE-CA
  Short wave optical GBIC (380561-B21)
DS-DXGGA-SA
McData 64-port Fibre Channel SAN Director Class Switches SAN Director 64 (1 Gb) 32 ports, base model
DS-DMGGD-AA
SAN Director (2 Gb) 64 ports
DS-DMGGD-BA
SAN Director Connectivity Manager Kit
DS-DMGGO-AA
  SAN Edge Switch (2 Gb) 16 ports
DS-DMGGE-BB
  SAN Edge Switch (2 Gb) 32 ports
DS-DMGGE-BC
  NOTE: Connection for, or between, 1-Gb and/or 2-Gb SAN switches requires different cables. Refer to the Switches, Hubs, and Interconnects QuickSpecs at: http://www.compaq.com/products/quickspecs/north_america/10490.html  
Fibre Channel Disk Drives 36-GB 10K rpm dual-port 2-Gb/sec FC-AL 1-inch (25.4mm) drive (238590-B21)
3R-A3239-AA
72-GB 10K rpm dual-port 2-Gb/sec FC-AL 1-inch (25.4mm) drive (238921-B21)
3R-A3260-AA
146-GB 10K rpm dual-port 2-Gb/sec FC-AL 1-inch (25.4mm) drive (293556-B21)
3R-A3975-AA
36-GB 15