| March 21,
2002 - From Version 26 to 27 |
|
Changed |
|
Significant changes occurred throughout the
entire document. |
| February 5,
2002 - From Version 25 to 26 |
|
Changed |
|
Significant changes occurred throughout the entire document. |
| October 11,
2001 - From Version 24 to 25 |
|
Changed |
|
Corrected graphic in HTML file. |
| October 8,
2001 - From Version 23 to 24 |
|
Changed |
|
| Technical Specifications |
| Cabinet Configuration |
|
H9A10 M-Series
|
H9A15 M-Series
|
|
Dimensions (HxWxD)
|
67 x 23.6 x 41.5 in/170
x 60 x 105.4 cm |
79 x 23.6 x 41.5 in/200 x 60
x 105.4 cm |
|
|
|
|
| Options |
| Step 3 was completely
revised |
|
| Step 4 -
Additional Power Supplies - Required for third and fourth CPUs
and/or second Disk Drive Cage |
Three power supplies support a maximum of 24-GB of memory
with N+1 power. (This restriction expected to be removed by
late Q4.)
|
|
|
Step 5a - Disk Drive Cage - Requires selection
of system disk drive |
|
System Disk Drives (Supported
in Disk Drive Cage) |
36.4-GB
Ultra3 SCSI 10,000 rpm 1.0' Universal disk drive |
3R-A0919-AA |
|
|
| Step 5c - StorageWorks
Model 4314R and Model 4354R Universal Drive Shelves |
| System Disk Drives (Supported
in Model 4314R and 4354R Universal Drive Shelves) |
36.4-GB
Ultra3 SCSI 15,000 rpm 1.0" Universal disk drive |
3R-A3079-AA |
|
| Step 6 -
Internal Removable Media - Optional |
|
5.25"
half-height 2-GB QIC tape drive, top gun blue; requires single-ended UltraSCSI adapter
(KZPBA-CA or KZPCM-DA) and SCSI cable (3X-BN46M-01) |
PBXTZ-AA |
|
|
| Step 11 -
Storage Devices - Optional |
| DLT Tape Drives |
110/220-GB
SDLT tape drive, supported in DLT tape drive enclosure |
192106-B21 |
|
|
| September 24,
2001 - From Version 22 to 23 |
|
Changed |
|
Changes
to Steps 1, 3, 4, 5, 8 |
| June 26, 2001
- From Version 21 to 22 |
|
Changed |
|
| Options |
| Step 3 -
Memory - Optional |
|
Notes:
ES40 configurations that require
maximum N+1 power (three power supplies) are restricted to a maximum of 24-GB of memory.
If N+1 maximum power is not required, 32-GB of memory is supported. (This
restriction expected to be removed by late Q3.) |
|
| Step 5c -
StorageWorks Model 4314R and Model 4354R Universal Drive Shelves |
| International Power Cords (For internal connection from power strip to
Universal shelves) |
IEC-320, 19-inch power cord |
BC25Y-1G |
| IEC-320, 60-inch power cord |
BC25Y-05 |
|
|
Added |
|
| Options |
| Step 4 -
Additional Power Supplies - Required for third and fourth
CPUs and/or second Disk Drive Cage |
- One power supply supports two CPUs, up to 12 memory DIMMs, and one disk card cage; order
second power supply if N+1 power is required.
|
- Two power supplies support third and fourth CPU, 13 to 32 memory DIMMs (up to 24-GB of
memory), and/or two disk card cages; order third power supply if N+1 power is required for
third and fourth CPUs, 24-GB of memory, and/or two disk card cages.
|
- Three power supplies support 32-GB of memory without N+1 power.
|
- Three power supplies support a maximum of 24-GB of memory with N+1 power. (This
restriction expected to be removed by late Q3.)
|
| Step 7 -
Ethernet Adapters - Mandatory |
|
PCI to
10/100/1000 UTP Ethernet adapter, maximum four per system; no network boot support; for
multiple adapters set console variable BOOT_RESET to YES and console firmware to V6.0 |
DEGPA-TA |
|
|
Removed |
|
| Options |
| Step 4 -
Additional Power Supplies - Required for third and fourth
CPUs and/or second Disk Drive Cage |
- Power supply included with system provides support for two CPUs and one disk drive cage
|
- Third and fourth CPUs and/or second disk drive cage require additional power supply
|
- Second power supply supports third and fourth CPU and second disk drive cage, or
provides N+1 for up to two CPUs and one disk drive cage
|
- Third power supply provides full N+1 redundancy for configurations restricted to a
maximum of 24-GB of memory. If N+1 redundant power is not required, 32-GB of memory is
supported.
|
|
| June 6, 2001
- From Version 20 to 21 |
|
Added |
|
| Systems/Options |
| Step 1 -
Select system |
AlphaServer ES40 systems require
the mandatory selection of the following items:
- Disk drive cage or StorageWorks shelf (Step 5)
- Disk drive cage requires mandatory selection of Ultra2 SCSI LVD storage adapter
(3X-KZPCA-AA)
- StorageWorks shelf requires UltraSCSI adapter and SCSI cable (Step 10)
- System disk drive (Step 5)
- Ethernet adapter (Step 7)
- Tower, Pedestal, or Rack Kit (Step 8)
- Non-North American systems require country-specific keyboard (Step 16); North American
systems include U.S. English keyboard
|
| Note: For
system integration of options with 6-3 part numbers, contact CustomSystems. |
| AlphaServer ES40 Systems |
| ES40 |
CPU |
PCI I/O Slots |
Memory / Cache |
Order No. |
| Model 1 |
500 MHz |
6 |
512 MB / 4 MB |
DJ-62AAA-CA |
| Model 1 |
667 MHz |
6 |
512 MB / 8 MB |
DJ-62BAA-CA |
| Model 1 |
667 MHz |
6 |
1 GB / 8 MB |
DJ-62BAA-DA |
| Model 1 |
667 MHz |
6 |
2 GB / 8 MB |
DJ-62BAA-EA |
| Model 2 |
667 MHz |
10 |
1 GB / 8 MB |
DJ-64BAA-DA |
| Model 2 |
667 MHz |
10 |
2 GB / 8 MB |
DJ-64BAA-EA |
| Model 2 |
667 MHz |
10 |
4 GB / 8 MB |
DJ-64BAA-FA |
|
|
|
|
|
| Model 1 |
833 MHz |
6 |
512 MB / 8 MB |
DJ-62CAA-CA |
| Model 1 |
833 MHz |
6 |
1 GB / 8 MB |
DJ-62CAA-DA |
| Model 1 |
833 MHz |
6 |
2 GB / 8 MB |
DJ-62CAA-EA |
| Model 2 |
833 MHz |
10 |
1 GB / 8 MB |
DJ-64CAA-DA |
| Model 2 |
833 MHz |
10 |
2 GB / 8 MB |
DJ-64CAA-EA |
| Model 2 |
833 MHz |
10 |
4 GB / 8 MB |
DJ-64CAA-FA |
Notes: ES40 Model 1 to Model 2 Upgrade Kit available - see Step 16.
For system integration of options with 6-3 part numbers, contact CustomSystems. |
| Step 3 -
Memory - Optional |
- Systems include one memory option; maximum 16 GB Model 1 and 32 GB Model 2 (see Note
s below)
|
| Notes: ES40
configurations that require N+1 redundant power are restricted to a maximum of 24-GB of
memory. If N+1 redundant power is not required, 32-GB of memory is supported. The patch to support greater than 2-GB of memory per system is
located at:
http://www.kernel.org/pub/linux/kernel/people/andrea/patches/v2.2/2.2.17
(patch name: bigmem-2.2.18pre2-18.bz2)
The following minimum operating system versions require the patch:
- Linux RedHat V6.2
- Linux SuSE V6.3 (Kernel V2.2.17) |
Step 4 -
Additional Power Supplies - Required for third and fourth
CPUs and/or second Disk
Drive Cage |
- Third power supply provides full N+1 redundancy
for configurations restricted to a maximum of 24-GB of memory. If N+1
redundant power is not required, 32-GB of memory is supported.
|
- Pedestal systems and Rack kit include three internal power cords regardless of the
number of power supplies ordered
|
| Step 5 -
Disk Drive Cage or StorageWorks Shelf - Mandatory |
| Step 5c -
StorageWorks Model 4314R and Model 4354R Universal Drive Shelves |
StorageWorks Model 4314R, 4354R
Ultra2 SCSI (LVD) single-bus and split-bus Universal drive shelves; refer to Compaq
StorageWorks Enclosure 4300 Family QuickSpecs when configuring shelves. When selecting a
DS-SL13R-split-bus shelf, order two 3X-KZPCA-AA adapters with BN38C-xx cables.
Model 43xx enclosures are compatible with Wide Ultra2 (LVD) adapters only. Note that the
depth of a DS-SL13R-xx shelf does not allow front and rear mounting. |
| Step 5c -
StorageWorks Model 4314R and Model 4354R Universal Drive Shelves |
| StorageWorks Model
4314R Ultra3 SCSI (LVD) single-bus Universal drive rackmount shelf, International (requires international power cord) |
DS-SL13R-AB (190209-B31) |
| StorageWorks Model
4354R Ultra3 SCSI (LVD) split-bus Universal drive rackmount shelf, International (requires international power cord) |
DS-SL13R-BB (190211-B31) |
| International
Power Cords for Universal Shelves |
| IEC-320,
19" power cord |
BC25Y-1G
|
| IEC-320,
60" power cord |
BC25Y-05
|
| IEC-320,
80" power cord |
BC25Y-6H
|
| IEC-320,
100" power cord |
BC25Y-8D
|
| IEC-320,
120" power cord |
BC25Y-10
|
| IEC-320,
.5m power cord |
BN35S-0E
|
| IEC-320,
1.5m power cord |
BN35S-1E
|
| IEC-320,
3m power cord |
BN35S-03
|
| Step 13 -
Monitors - Optional |
- Monitors will ship with, but not be integrated with systems.
|
| V570
15" (13.8" viewable image size) multiple-scan color monitor with Invar Shadow
Mask, VGA to 1024 x 768 @ 75 Hz, 0.28mm AG, TCO99; Northern Hemisphere with NA power cord |
3R-A3082-AA |
| Same
as above with Eurocord |
3R-A3083-AA |
| Same
as above, APD, no power cord |
3R-A3084-AA |
|
| P710 17"
(16" viewable image size) auto-scanning color monitor, Diamondtron NF, 0.25mm
aperture grille pitch, VGA to 1280 x 1024 @ 75 Hz, TCO 99; Northern Hemisphere with NA
power cord |
3R-A2936-AA |
| Same as above, APD,
no power cord |
3R-A2260-AA |
| Same
as above, PRC with power cord, CCIB |
3R-A3335-AA |
| Same
as above, Southern Hemisphere, with Australia/New Zealand power cord |
3R-A2263-AA |
| Same as above,
Northern Hemisphere, with Power Factor Correction and Eurocord, 220V only |
3R-A2261-AA |
|
| P910 19"
(18" viewable image size) auto-scanning color monitor, Diamondtron NF, 0.25mm
aperture grille pitch, VGA to 1280 x 1024 @ 85 Hz, TCO 99; Northern Hemisphere with NA
power cord |
3R-A2935-AA |
| Same
as above, PRC with power cord, CCIB |
3R-A3334-AA |
| Same
as above, Southern Hemisphere with Australia/New Zealand power cord |
3R-A2267-AA |
|
| P1210 22"
(20" viewable image size) auto-scanning color monitor, Diamondtron NF, 0.24mm
aperture grille pitch, VGA to 1600 x 1200 @ 85 Hz, TCO 99 with power factor correction,
Northern Hemisphere with NA power cord |
3R-A2934-AA |
| Same as above with
Eurocord |
3R-VRQP2-24 |
| Same as above, APD,
no power cord |
3R-A2268-AA |
| Same
as above, PRC with power cord, CCIB |
3R-A3333-AA |
|
|
|
| Step
16 - Upgrade Kit - Optional |
|
Upgrades ES40
Model 1 with six I/O slots and support for four memory options to ES40 Model 2 with 10 I/O
slots and support for eight memory options |
3X-KFPPA-AA |
|
|
Removed |
|
| Options |
| Step 7 - Ethernet Adapters - Mandatory |
| PCI
4-port 10/100 Mb Ethernet adapter, maximum one per system |
DE504-BA |
| Step 13 -
Monitors - Optional |
- Country-specific power cord is required for all monitors; if not included, order power
cord as appropriate
|
| S510 15"
(13.8" viewable image size) multiple-scan color monitor with Invar Shadow Mask, VGA
to 1024 x 768 @ 75 Hz, 0.28mm AG, MPR II; Northern Hemisphere with NA power cord |
3R-A1741-AA |
| Same as above,
with Eurocord |
3R-A2832-AA |
| Same as above,
APD, no power cord |
3R-VRQS5-24 |
| Same as above,
Southern Hemisphere, with Australia/New Zealand power cord |
3R-A2263-AA |
| Step 14 -
Keyboards, Power Cords, Documentation |
| Pedestal Power Cords |
| Germany,
2.5m |
BN35S-02 |
|
|
Changed |
|
| Options |
| Step 6 - Internal Removable Media - Optional |
| 5.25² half-height 12/24-GB 4mm DAT SCSI tape drive, top gun blue;
requires single-ended UltraSCSI adapter (KZPBA-CA or KZPCM-DA) and SCSI cable (3X-BN46M-01) |
TLZ10-LB |
5.25"
half-height 2-GB QIC tape drive, top gun blue; requires single-ended UltraSCSI adapter
(KZPBA-CA or KZPCM-DA) and SCSI cable (3X-BN46M-01) |
PBXTZ-AA |
| Step 10 - Storage Adapters - Required if
StorageWorks shelf is selected in Step 5 |
|
|
Please note that because step 16 was added, the former steps 16
and 17 became 17 and 18. |
| April 10,
2001 - From Version 19 to 20 |
|
Changed |
|
Change
affected Canada QuickSpecs only. |
| April 3, 2001
- From Version 18 to 19 |
|
Added |
|
Options |
|
| Step 3 - Memory - Optional |
|
|
- Systems include one memory option; maximum 16 GB Model 1 and 32 GB Model 2 (see Note below)
|
|
|
The following
operating system minimum versions support greater than 2-GB of memory:
- Linux RedHat V7.0 (installs Kernel V2.2.17)
- Linux SuSE V7.0 (installs Kernel V2.2.16)
When installing Linux SuSE V7.0 on a system
with more than 2-GB of memory, user will be prompted for a (ramdisk) floppy. To create a
floppy:
- Mount the SuSE V7.0 installation CD-ROM #1
on the system.
- Mount a blank formatted floppy (if not
formatted, execute the following command: fdformat/dev/fd0H1440).
- Change directory, to the "disks"
directory on the install CD-ROM.
- Execute the following command to create the
floppy contents: dd if=install of=/dev/fd0.
- Use this floppy when prompted by the install
procedure for a floppy.
|
|
|
| Step 5
- Disk Drive Cage or StorageWorks Shelf - Mandatory |
StorageWorks Model 4314T Standalone Enclosure for
Universal Drives
|
Model 4314T Ultra3 SCSI, single-bus
tower enclosure, US
|
DS-SL13T-AA |
Model 4314T Ultra3 SCSI, single-bus
tower enclosure, International
|
DS-SL13T-AB |
Model 4314T Ultra3 SCSI, single-bus
tower enclosure, Japan
|
DS-SL13T-AJ |
|
|
|
|
Step 9 - M-Series Cabinets |
|
| Cabinet
Configuration Chart for AlphaServer ES40 (8U) with StorageWorks Shelves (4U) |
| Cabinet |
Systems |
BA356 Shelves |
DS-S L13R 120V
Shelves2 |
BA356/
DS-SL13R3 |
| H9A15-MC/MD4 |
BA356 |
DS-SL13R |
|
55 |
0 |
0 |
0 |
0 |
|
|
|
- When adding the 5th system
drawer, replace H7600-AA or -DB power controller with H7602-EA or -DB power controller.
When replacing H7600 controllers, replace all associated power cords; order BN35S-4E power
cords for H7602-EA and H7602-DB power controllers.
|
|
|
| Step 10 - Storage
Adapters - Required if StorageWorks shelf is selected in Step 5 |
Step 10a – Storage Adapters (Optional)
|
PCI to Fibre Channel adapter, 64-bit,
single-channel (uses one PCI slot); includes cable to HSG80 controller; requires Linux
RedHat V6.2 and Linux SuSE V6.3, maximum three per system; for more information refer to http://www.compaq.com/products/storageworks/adapters/fchba-linux.html
|
DS-SWLA4-PD |
|
|
Changed |
|
Standard Features |
|
| Memory |
Minimum
|
512 MB |
Maximum
|
32
GB (see Step 3) |
|
|
Options |
|
| Step 3 - Memory - Optional |
|
|
|
|
| Step 5 - Disk
Drive Cage or StorageWorks Shelf - Mandatory |
- M-Series cabinets support
five systems each with two disk drive cages and up to six StorageWorks
shelves
|
|
|
| Step 5c -
StorageWorks Model 4314R and Model 4354R Universal Drive Shelves |
StorageWorks Model
4314R, 4354R Ultra2 SCSI (LVD) single-bus and split-bus Universal drive shelves; refer to
Compaq StorageWorks Enclosure 4300 Family QuickSpecs when configuring shelves. When
selecting a
DS-SL13R-split-bus shelf, order two
3X-KZPCA-AA adapters with BN38C-05 cables. Model 43xx enclosures are compatible with Wide
Ultra2 (LVD) adapters only. Note that the depth of a DS-SL13R-xx shelf does not allow
front and rear mounting. |
| StorageWorks Model 4314R Ultra3 SCSI (LVD) single-bus Universal drive
rackmount shelf, US |
DS-SL13R-AA
(190209-001) |
| StorageWorks Model 4314R Ultra3 SCSI (LVD) single-bus Universal drive rackmount shelf, International |
DS-SL13R-AB
(190209-B31) |
| StorageWorks Model 4314R Ultra3 SCSI (LVD) single-bus Universal drive rackmount shelf, Japan |
DS-SL13R-AJ
(190209-291) |
| StorageWorks Model 4354R Ultra3 SCSI (LVD) split-bus Universal drive rackmount shelf, US |
DS-SL13R-BA
(190211-001) |
| StorageWorks Model 4354R Ultra3 SCSI (LVD) split-bus Universal drive rackmount shelf, International |
DS-SL13R-BB
(190211-B31) |
| StorageWorks Model 4354R Ultra3 SCSI (LVD) split-bus Universal drive rackmount shelf, Japan |
DS-SL13R-BJ
(190211-291) |
|
| March 20,
2001 - From Version 18 to 18 |
|
Added |
|
| Options |
| Step 15 -
Monitors - Optional |
- Country-specific power cord is required for all monitors; if not included, order power
cord as appropriate
|
- Video extension cable required if monitor is located more than 1 meter from server
|
|
|
Removed |
|
| Options |
| Step 15 -
Monitors - Optional |
- Selection of a video extension cable for Rackmount configurations and country-specific
power cord is mandatory for all monitors; order power cord as appropriate
|
|
| March 19,
2001 - From Version 17 to 18 |
|
Added |
|
| Systems/Options |
| Step 1 - Select system |
| AlphaServer ES40 systems require the mandatory selection of the
following items: |
| Step 2 - Additional CPU Modules - Optional |
Note:
Additionally, when upgrading to EV68,
first upgrade the console firmware as outlined below: |
| From: |
To: |
| EV67 667-MHz CPU |
EV68
833-MHz CPU |
|
Upgrade
console firmware to V5.9-24 as minimum revision |
|
Upgrade
system hardware with EV68 CPUs |
|
Ensure
all system firmware matches console version V5.9-24 |
| EV6 500-MHz CPU |
EV68
833-MHz CPU |
|
Upgrade
console firmware to V5.9-24 as minimum revision |
|
Upgrade
system hardware with EV68 CPUs |
|
Re-install
V5.9-24 console firmware |
|
Ensure
all system firmware matches console version V5.9-24 |
| Options |
| Step 9 - M-Series Cabinets |
| Power
Supply |
|
| 180W power supply,
includes 120V North American and 240V IEC power cord |
DS-BA35X-HH |
| Step 13 - Monitors - Optional |
- Graphics monitors other than those listed can be used if compatible with SVGA graphics
ordered with system
|
- Selection of a video extension cable
for
rackmount configurations and country-specific power
cord is mandatory for all monitors; order
power cord as appropriate
|
| Step 14 - Keyboards, Power Cords, Documentation |
| Step 14c - Documentation |
| Additional
AlphaServer ES40 System Information Kit (print and CD), Owners Guide, User Interface Guide,
and Release Notes |
QA-6E88A-G8 |
|
|
|
|
Removed |