| Octeber
10, 2003 - From Version 64
to 65 |
|
Changed |
|
Significant changes occurred throughout the Options section. |
| September
10, 2003 - From Version 63
to 64 |
|
Changed |
|
Significant changes occurred throughout the Options section. |
| August
13, 2003 - From Version 62
to 63 |
|
Changed |
|
Significant changes occurred throughout the Options section. |
| July
31, 2003 - From Version 61
to 62 |
|
Changed |
|
Significant changes occurred throughout the Options section. |
| July
15, 2003 - From Version 60
to 61 |
|
Changed |
|
Significant changes occurred throughout the Options section. |
| June
18, 2003 - From Version 59
to 60 |
|
Changed |
|
Step 18 was completely revised to reflect new HP Care Pack information. |
| May
13, 2003 - From Version 58
to 59 |
|
Changed/Added |
|
New trademarking was applied throughout the entire document. |
|
Options |
|
| Step 8 - Networking
Adapters/Controllers |
| Step 8a - Networking Adapters/Controllers - Mandatory |
| |
Maximum #
Supported |
|
| |
Tru64 UNIX |
OpenVMS |
Linux |
|
| Ethernet 10/100/1000 |
PCI (32-/64-bit, 33-/66-MHz)
dual-port 10/100 Ethernet (UTP/RJ45s) NIC and Base Module. (One 3X-DE602-TA or 3X-DE602-FA
optional add-on daughter card can be combined with this module.) Use BN25G, BN26M,
BN24Q, or BN28Q twisted pair RJ45 cables. |
4 |
4 |
- |
3X-DE602-BB |
| |
PCI single-port
1000 Mbps (MMF with duplex-SC) Gigabit Ethernet;
Tru64 UNIX V5.1B/TruCluster V5.1B supports up to eight nodes and requires: -
T64v51bb03as0001-20021229.tar - -http://ftp1.support.compaq.com/public/unix/v5.1b/
t64v51bb1-c0003000-16672-e-20030130.README
Tru64 UNIX V5.1A/TruCluster V5.1A supports up to eight nodes and requires: -
T64V51AB21AS0004-20030206.tar
OpenVMS not supported as cluster interconnect device; V7.301 requires:
- DEC-AXPVMS-VMS731_LAN-V0400—4.PCSI
NOTE: Use BN34A, BN34B, or equivalent cables with SC connectors. |
4 |
4 |
- |
3X-DEGXA-SA |
| |
PCI single-port
10/100/1000 Mbps (Twisted-Pair Copper with RJ45) Gigabit Ethernet; Tru64 UNIX
V5.1B/TruCluster V5.1B supports up to eight nodes and requires:
- T64v51bb03as0001-20021229.tar
http://ftp1.support.compaq.com/public/unix/v5.1b/
t64v51bb1-c0003000-16672-e-20030130.README
Tru64 UNIX V5.1A/TruCluster V5.1A supports up to eight nodes and requires: -
T64V51AB21AS0004-20030206.tar
OpenVMS not supported as cluster interconnect device; V7.301 requires:
- DEC-AXPVMS-VMS731_LAN-V0400—4.PCSI
NOTE: Use BN25G, BN26M, BN24Q, BN28Q twisted pair RJ45 cables. |
4 |
4 |
- |
3X-DEGXA-TA |
|
|
| Step 11 - Storage
Devices - Optional |
| Step 11a - Tape Devices |
| DAT Tape Drives (Internal) |
- Select up to two
DAT devices
- The following DAT tape drives are supported with 3X-KZPCA-AA, and 3X-DEPVZ-AA
adapters.
|
|
|
|
| Step 11 -
Storage Devices - Optional |
| Step 11c
– External Storage Solutions/Controllers |
External Storage
Solutions/Controllers |
Enterprise Virtual Array Model
2C6D-B 60-Hz, includes 41U graphite storage cabinet, M3220 controller assembly with dual
HSV110 controllers, six M5214 dual-redundant FC loop 14-bay drive enclosures, four 12-port
FC loop switches; requires DS-KGPSA-xx (283198-B21) |
DS-SV110-JA |
|
Enterprise
Virtual Array 3000, 60 Hz (321618-B21)
NOTE: V5.1A requires T64V51AB03AS0003-20020725.tar
V5.1B requires T64V51BB1AS0001-20021229.tar
OpenVMS V7.2.2 requires VMS722_FIBRE_SCSI-v0300—4.PCSI |
DS-SWR20-AA |
|
Enterprise
Virtual Array 3000, 50 Hz (321619-B21)
NOTE: V5.1A requires T64V51AB03AS0003-20020725.tar
V5.1B requires T64V51BB1AS0001-20021229.tar
OpenVMS V7.2.2 requires VMS722_FIBRE_SCSI-v0300—4.PCSI |
DS-SWR20-AB |
|
|
| Step 11d
– Fibre Channel Options |
|
The following hubs,
data routers, switches, and cables are used in Fibre Channel configurations using the
DS-KGPSA-xx adapter. |
| Fibre Channel Disk Drives |
36-GB 10K rpm dual-port 2-Gb/sec
FC-AL 1-inch (25.4 mm) drive (238590-B21) |
3R-A3239-AA |
|
72-GB 10K rpm dual-port 2-Gb/sec
FC-AL 1-inch (25.4 mm) drive (238921-B21) |
3R-A3260-AA |
|
146-GB 10K rpm
dual-port 2-Gb/sec FC-AL 1-inch (25.4 mm) drive (293556-B21) |
3R-A3975-AA |
|
36-GB 15K rpm dual-port 2-Gb/sec
FC-AL 1-inch (25.4 mm) drive (236205-B21) |
3R-A3210-AA |
|
72-GB 15K rpm
dual-port 2-Gb/sec FC-AL 1-inch (25.4 mm) drive (293568-B21) |
3R-A3971-AA |
|
|
| McData 64-port
Fibre Channel SAN Director Class Switches |
SAN Director 64 (1 Gb) 32 ports,
base model |
DS-DMGGD-AA |
| SAN Director 2 Gb, 64 ports
(286809-B21) |
DS-DMGGD-BA |
|
SAN Director 64
(2 Gb) 140 ports |
DS-DMGGD-CA |
|
SAN Edge Switch 2 Gb, 32 ports
(286810-B21) |
DS-DMGGE-BC |
|
SAN Edge Switch 2-Gb, 16 ports
(286811-B21) |
DS-DMGGE-BB |
|
SAN Edge Switch 2
Gb, 24 ports |
DS-DMGGE-BD |
|
|
Removed |
|
| RA3000
RAID Array |
RAID Array 3000
(HSZ22) storage array is supported on AlphaServer ES40 systems (Tru64 UNIX V4.0F, V5.0A or
higher and OpenVMS V7.x); supports KZPBA-CB adapter, minimum console V5.8 |
|
|
|
|
| April
9, 2003 - From Version 57 to
58 |
|
Changed |
|
Options |
|
Significant changes occurred throughout the Options section. |
| March
18, 2003 - From Version 56
to 57 |
|
Changed |
|
Significant changes occurred throughout the entire document. |
| January
29, 2003 - From Version 55
to 56 |
|
Changed |
|
Significant changes occurred throughout the entire document. |
| December
16, 2002 - From Version 54
to 55 |
|
Changed/Added |
|
Standard
Features |
|
| Interfaces |
Parallel |
1 25-pin parallel
port |
|
Serial |
2 9-pin serial ports |
|
USB |
Dual USB ports |
|
Keyboard |
1 port |
|
Mouse |
1 port |
|
Remote systems
management |
1 dedicated remote
systems management port |
|
SCSI connections |
Two 68-pin SCSI
connections knockouts |
|
|
Options |
|
| Step
10 - Storage Adapters/Controllers - Required if StorageWorks shelf is selected in Step
5 |
| RAID |
PCI 2-port PCI to Ultra3, 64-bit,
66 MHz, LVD backplane RAID controller with 128-MB cache (uses one PCI slot); requires
connection to DS-SL13R-xx shelves or BA610-6D card cage.
NOTE: Supports EV68 systems
only; no host-based volume shadowing or shared bus support under OpenVMS |
- |
6 per system 3 per PCI 0
4 per PCI 1 |
- |
3X-KZPDC-BE |
|
PCI 4-port PCI to Ultra3, 64-bit,
66 MHz, LVD backplane RAID controller with 256-MB cache (uses one PCI slot); requires
connection to DS-SL13R-xx shelves or BA610-6D card cage.
NOTE: Supports EV68 systems
only; no host-based volume shadowing or shared bus support under OpenVMS |
- |
6 per system 3 per PCI bus
4 per PCI 1 |
- |
3X-KZPDC-DF |
|
|
| Step
11a - Tape Devices |
| Tape Drives |
- System includes embedded 1.44-MB diskette drive
|
|
- System includes
embedded 5.25-inch half-height 600-MB 16X IDE CD-ROM drive
|
|
|
- Removable media slots provide support for up to two
5.25-inch half-height devices, or one 5.25-inch full-height removable media device; select up to two AIT or DAT devices, or one DLT/SDLT tape devices
|
|
|
- For maximum performance, tape libraries must be configured with Fast Wide Differential
(FWD) controllers for tape backup
|
|
|
|
|
|
|
| SDLT Tape Drives (Internal) |
- System supports four internal removable devices; select up to one
DLT/SDLT tape devices
|
|
|
SDLT 110/220-GB 3U/5U tape drive;
requires 3X-KZPCA-AA LVD adapter
(Linux-supported option) |
192106-B25 |
|
SDLT 160/320-GB 3U/5U tape drive;
requires 3X-KZPCA-AA LVD adapter, carbon black |
257319-B21 |
|
|
|
|
| Step 13 -
Monitors - Optional |
| Carbon/Silver Monitors |
P720 17-inch (16-inch viewable
image size) auto-scanning color monitor, Diamondtron NF, 0.25-mm aperture grille pitch,
VGA to 1280 x 1024 @85 Hz, MPRII/TCO 99/Energy Star Compliant, Northern Hemisphere with
Euro power cord, VGA cable – NOTE: This
variant can also be used for North America and Asia Pacific |
3R-A3389-AA |
| Carbon/Silver Flat Panel
Monitors |
TFT1825, 18-inch (18-inch
viewable image size) TFT flat panel monitor, 0.28mm pixel pitch, 1600 x 1200 @60Hz,
multi-mode support, MPRII/TCO99/Energy Star compliant, one VGA, one DVI-I input connector.
NA power cord, VGA and DVI-I cables |
3R-A4292-AA
|
|
TFT1520,
15.1-inch (15-inch viewable image size) TFT flat panel monitor, 0.297 mm pixel pitch, 1024
x 768 @75 Hz, multi-mode support, MPRII/TCO99/Energy Star compliant, two video input
connectors (one VGA and one DVI-I), NA power cord, VGA and DVI-I cables |
3R-A4249-AA |
|
| November
26, 2002 - From Version 52
to 53 |
|
Changed |
|
Significant changes occured throughout the document |
| November
6, 2002 - From Version 51 to
52 |
|
Changed |
|
Significant changes occured throughout the document |
| September
23, 2002 - From Version 50
to 51 |
|
Changed |
|
Significant changes occured throughout the document |
| September
12, 2002 - From Version 49
to 50 |
|
Changed |
|
Changes apply to the Canada QuickSpec only. |
| September
3, 2002 - From Version 48 to
49 |
|
Changed/Added |
|
Options |
|
| Step 10 -
Storage Devices - Optional |
|
|
| DLT/SDLT Tape Libraries |
Rackmount kit for
H9Axx M-Series cabinets – required for mounting MSL5000 series in M-Series cabinets |
254795-001 |
|
|
| 3U Rackmount Tape Drive
Enclosure |
3U LVD Rackmount
Tape Drive Enclosure for use in H9Axx
M-Series Cabinets, carbon black, 0 drives |
274338-B21 |
|
|
| Fibre Channel
Configurations |
The
following hubs, data routers, switches, and cables are used in Fibre Channel
configurations using the DS-KGPSA-xx adapter. |
| Fibre Channel
Hubs |
Fibre Channel
7-port Storage Hub, International (Tru64 UNIX only) |
234453-B31
DS-SWXHB-17 |
|
Fibre Channel
7-port Storage Hub, Japan (Tru64 UNIX only) |
234453-291
DS-SWXHB-J7 |
| Fibre Channel
Routers |
1 Fibre Channel x
2 HVD data router |
163082-B21
3R-A2673-AA |
|
1 Fibre Channel x
2 LVD data router |
163083-B21
3R-A2774-AA |
|
2 x 4 LVD Fiber
Channel to SCSI Network Storage Router |
262653-B21
3R-A3740-AA |
|
2 x 4 HVD Fiber
Channel to SCSI Network Storage Router |
262654-B21
3R-A3741-AA |
|
|
| McData 64-port
Fibre Channel SAN Director Class Switches |
SAN Director
Connectivity Manager Kit |
DS-DMGGO-AA
|
| Fibre Channel
Director Class 1-Gb switch – 64-ports (OpenVMS only) |
DS-DMGGD-AA |
|
SAN Director 64 Long-wave 4-port
module kit |
DS-DMGGD-AC |
|
SAN Director 64 Short-wave 4-port
module kit |
DS-DMGGD-AD |
|
SAN Director 64
Combo Long – 1 port/Short – 3 ports - Wave Module Kit |
DS-DMGGD-AE |
|
|
| When using Tru64 UNIX V5.0A or
later |
DECnet/OSI extended function
license for Tru64 UNIX |
QL-MTKAE-AA
|
|
DECnet/OSI end-system license for
Tru64 UNIX |
QL-MTJAE-AA
|
| AIT Tabletop Tape Drives |
AIT 35/70-GB 8-mm LVD tabletop
tape drive, carbon black, North America; requires LVD adapter |
216885-001 |
| DLT/SDLT Tape
Libraries |
ESL9198SL
SDLT tape library with four 110/220-GB SDLT tape drives, 198
slots - requires 3X-KZPCA-AA adapter |
234618-B21 |
|
|
|
|
Removed |
|
| Step 2 -
Additional CPU Modules - Optional |
- One CPU included, three additional CPUs are supported
|
|
SMP upgrade,
includes one 6/500-MHz CPU with 4-MB cache and Tru64 UNIX
SMP license |
KN610-AB |
|
SMP upgrade,
includes one 6/500-MHz CPU with 4-MB cache and OpenVMS
SMP license |
KN610-AC |
|
|
|
|
|
| AIT Tape Drives (Internal) |
AIT 5.25-inch half-height
35/70-GB 8-mm AIT Wide UltraSCSI tape drive, top gun blue; requires single ended
UltraSCSI adapter or Ultra2 adapter (KZPBA-CA,
3X-DEPVZ-AA, KZPCM-DA, or 3X-KZPCA-AA) and SCSI cable (3X-BN46M-01) |
3X-SZ35X-LB |
|
AIT 5.25-inch half-height
35/70-GB 8-mm AIT LVD UltraSCSI tape drive, carbon black;
requires LVD adapter |
3R-A2392-AA |
|
AIT 5.25-inch half-height
50/100-GB 8-mm AIT Ultra2 (LVD) SCSI tape drive, top gun blue; requires Ultra2 (LVD)
adapter and SCSI cable (3X-BN46M-01) |
3X-SZ50X-LB |
|
|
|
| Step 10 -
Storage Devices - Optional |
| DLT/SDLT Tape Libraries |
Rackmount kit for
MSL5000 series – for use with H9Axx M-Series cabinets |
254795-001 |
|
ESL9326DX DLT
Enterprise tape library with 12 40/80-GB tape drives - requires KZPBA-CB adapter |
161265-B26 |
|
|
|
| DLT/SDLT Tabletop Tape Drives |
DLT4000 tabletop
20/40-GB DLT external tape drive - requires 3X-KZPCA-AA
LVD adapter and SN-PBXKP-BA wide-to-narrow cable adapter |
TZ88N-TA |
|
|
|
| DLT/SDLT Tape Libraries |
ESL9326SL LVD
with six SDLT 110/220-GB drives |
234615-B21 |
|
ESL9326SL LVD
with eight SDLT 110/220-GB drives |
234615-B22 |
|
ESL9326SL LVD
with 16 SDLT 110/220-GB drives |
234615-B26 |
|
|
|
|
| DLT/SDLT Tape
Libraries |
ESL9326DX DLT
Enterprise tape library with six 40/80-GB tape drives -
requires KZPBA-CB adapter |
161265-B23 |
| ESL9326DX DLT
Enterprise tape library with eight 40/80-GB tape drives -
requires KZPBA-CB adapter |
161265-B24 |
| ESL9326DX DLT
Enterprise tape library with 10 40/80-GB tape drives - requires
KZPBA-CB adapter |
161265-B25 |
| ESL9326DX DLT
Enterprise tape library with 14 40/80-GB tape drives - requires
KZPBA-CB adapter |
161265-B27 |
| ESL9326DX DLT
Enterprise tape library with 16 40/80-GB tape drives - requires
KZPBA-CB adapter |
161265-B28 |
|
| June
25, 2002 - From Version 47
to 48 |
|
Changed |
|
Overview |
|
Alpha 21264 68/833-MHz CPU with 8-MB L2 Dual Data Rate Cache |
|
Options |
|
Step
10 - Storage Adapters/Controllers - Required
if StorageWorks shelf is selected in Step 5 |
|
PCI to 2-Gbit Fibre Channel
adapter, 64-bit, single-channel
(uses one PCI slot) NOTE:
When used in standalone or TruCluster environment (with Fibre Channel Switches, Step 11),
a maximum of six adapters is supported. Arbitrated loop is not supported.
Tru64 UNIX V 5.1 requires Patch Kit:
T64V51B18AS0004-20011114.tar |
See Note |
See Note |
DS-KGPSA-DA
(261329-B21) |
|
|
Added |
|
Options |
|
| AIT Tape Drives |
AIT
35/70-GB 8 mm LVD tabletop tape drive, North America; requires LVD adapter |
216885-001 |
| AIT
35/70-GB 8 mm LVD tabletop tape drive, International; requires LVD adapter |
216885-B31 |
|
AIT 35/70-GB
8 mm LVD tabletop tape drive, Japan; requires LVD adapter |
216885-291 |
|
AIT
35/70-GB 8 mm SCSI tabletop tape drive with 120V North American power cord; requires
3X-KZPCA-AA or KZPBA-CA SCSI adapter |
388507-001 |
|
AIT
35/70-GB 8 mm SCSI tabletop tape drive, International; requires 3X-KZPCA-AA or KZPBA-CA
SCSI adapter |
388507-B31 |
|
AIT 50/100-GB 8
mm SCSI tabletop tape drive; requires 3X-KZPCA-AA LVD adapter (carbon black) |
3R-A3753-AA 157766-B22 |
|
AIT
50/100-GB 8 mm SCSI tabletop tape drive with 120 V North American power cord; requires
Ultra2 (LVD) adapter |
157767-001 |
|
AIT
50/100-GB 8 mm SCSI tabletop tape drive, International; requires Ultra2 (LVD) adapter |
157767-B31 |
|
AIT
35/70-GB hot plug LVD Universal tape drive, uses two slots in BA610-6D or 43xxx shelves |
3R-A2396-AA |
|
AIT
50/100-GB hot plug LVD Universal tape drive, uses two slots in BA610-6D or 43xxx shelves |
3R-A2779-AA |
|
AIT 35-GB,
tabletop autoloader, 8 cartridge |
282175-002 |
|
AIT 35-GB
rackmount autoloader, 8 cartridge |
282175-001 |
|
AIT Rail kit for
autoloader |
284930-001 |
|
|
| DAT Drives |
DAT 20/40-GB
internal tape drive |
3R-A3752-AA 157769-B22 |
| DLT/SDLT Tape
Drives |
DLT8000 tabletop 40/80-GB DLT
external tape drive - requires 3X-KZPCA-AA
LVD adapter |
146197-B21 |
|
DLT8000 tabletop 40/80-GB DLT
external tape drive - requires LVD adapter -
Japan |
146197-291 |
|
DLT8000 40/80-GB
DLT internal tape drive; requires 3X-KZPCA-AA LVD adapter |
146196-B22 |
|
SDLT8000 110-GB
DLT internal tape drive; requires 3X-KZPCA-AA LVD adapter |
192106-B25 |
|
DLT4000 tabletop
20/40-GB DLT external tape drive - requires 3X-KZPCA-AA
LVD adapter and SN-PBXKP-BA wide-to-narrow cable adapter |
TZ88N-TA |
|
SDLT tabletop
110/220-GB external tape drive - requires 3X-KZPCA-AA LVD
adapter - U.S. |
192103-001 |
|
MSL5052SL
SDLT rackmount library, 0 drives, LVD |
255102-B21 |
|
MSL5052SL
SDLT tabletop library with two 110/220-GB drives, LVD |
249490-B21 |
|
MSL5052SL
SDLT rackmount library with two 110/220-GB drives, LVD |
249491-B21 |
|
MSL5052SL
SDLT 110/220-GB drive field upgrade, LVD |
231823-B22 |
DLT/SDLT Tape
Drive Enclosures
(for rackmount configurations) |
Rackmount Kit for
H9Axx Series Cabinets, 3U |
3R-A3804-AA |
| SDLT 110/220-GB,
dual-drive, 3U rackmount kit, carbon black |
274334-B21 |
|
DLT 40/80-GB,
dual-drive, 3U rackmount kit, carbon black |
274335-B21 |
|
SDLT 110/220-GB, 3U rackmount kit, carbon black |
274331-B21 |
|
DLT 40/80-GB, 3U rackmount kit, carbon black |
274332-B21 |
|
AIT 50-GB, 3U rackmount kit, carbon black |
274333-B21 |
|
|
| External Storage
Solutions/Controllers |
Fibre Channel Controller (HSG80),
includes 256-MB cache; requires following firmware: 8.6-4F ACS FW (222318-B22, QB-6BUAA-SD), one per
controller
8.6-4S ACS FW (222364-B22 QB-6ENAA-SC), one per controller
8.6-4P ACS FW (222316-B22, QB-6CAAA-SD), one per controller
requires TRU64 UNIX software: 222320-B23, QB-65RAB-SE, one per controller
requires OpenVMS software: 222321-B22, QB-65RAC-SD, one per controller |
DS-HSG80-BK |
|
Additional 256-MB
cache for HSG80 |
DS-HSDIM-AC
380674-B21 |
|
Single cache
battery, one per HSG80 controller |
DS-SE2CS-CB
135823-B21 |
|
|
| Fibre Channel Switches |
Fibre Channel
2-GB 8-port SAN switch |
258707-B21
(U.S./Canada orders) |
|
|
DS-DSGGD-AC
(Other country orders) |
|
Fibre Channel
2-GB 16-port SAN switch |
283056-B21
(U.S./Canada orders) |
|
|
DS-DSGGD-AD
(Other country orders) |
|
|
Removed |
|
Systems/Options |
|
| AlphaServer ES40 Systems |
| ES40 |
OS |
CPU |
PCI I/O Slots |
Memory/Cache |
Order Number |
| Model
1 |
Tru64
UNIX |
667
MHz |
6 |
512
MB/8 MB |
DA-62BAA-CA |
| Model
1 |
Tru64
UNIX |
667
MHz |
6 |
1
GB/8 MB |
DA-62BAA-DA |
| Model
1 |
Tru64
UNIX |
667
MHz |
6 |
2
GB/8 MB |
DA-62BAA-EA |
| Model 1 |
Tru64 UNIX |
833 MHz |
6 |
512 MB/8 MB |
DA-62CAA-CA |
| Model 1 |
Tru64 UNIX |
833 MHz |
6 |
1 GB/8 MB |
DA-62CAA-DA |
| Model 1 |
Tru64 UNIX |
833 MHz |
6 |
2 GB/8 MB |
DA-62CAA-EA |
| |
|
|
|
|
|
| Model
2 |
Tru64
UNIX |
667
MHz |
10 |
512
MB/8 MB |
DA-64BAA-CA |
| Model
2 |
Tru64
UNIX |
667
MHz |
10 |
1
GB/8 MB |
DA-64BAA-DA |
| Model
2 |
Tru64
UNIX |
667
MHz |
10 |
2
GB/8 MB |
DA-64BAA-EA |
| Model
2 |
Tru64
UNIX |
667
MHz |
10 |
4
GB/8 MB |
DA-64BAA-FA |
| Model 2 |
Tru64 UNIX |
833 MHz |
10 |
512 MB/8 MB |
DA-64CAA-CA |
| Model 2 |
Tru64 UNIX |
833 MHz |
10 |
1 GB/8 MB |
DA-64CAA-DA |
| Model 2 |
Tru64 UNIX |
833 MHz |
10 |
2 GB/8 MB |
DA-64CAA-EA |
| Model 2 |
Tru64 UNIX |
833 MHz |
10 |
4 GB/8 MB |
DA-64CAA-FA |
| |
|
|
|
|
|
| Model
1 |
OpenVMS |
667
MHz |
6 |
512
MB/8 MB |
DY-62BAA-CA |
| Model
1 |
OpenVMS |
667
MHz |
6 |
1
GB/8 MB |
DY-62BAA-DA |
| Model
1 |
OpenVMS |
667
MHz |
6 |
2
GB/8 MB |
DY-62BAA-EA |
| Model 1 |
OpenVMS |
833 MHz |
6 |
512 MB/8 MB |
DY-62CAA-CA |
| Model 1 |
OpenVMS |
833 MHz |
6 |
1 GB/8 MB |
DY-62CAA-DA |
| Model 1 |
OpenVMS |
833 MHz |
6 |
2 GB/8 MB |
DY-62CAA-EA |
| ES40 |
OS |
CPU |
PCI I/O Slots |
Memory/Cache |
Order Number |
| Model
2 |
OpenVMS |
667
MHz |
10 |
1
GB/8 MB |
DY-64BAA-DA |
| Model
2 |
OpenVMS |
667
MHz |
10 |
2
GB/8 MB |
DY-64BAA-EA |
| Model
2 |
OpenVMS |
667
MHz |
10 |
4
GB/8 MB |
DY-64BAA-FA |
| Model 2 |
OpenVMS |
833 MHz |
10 |
512 MB/8 MB |
DY-64CAA-CA |
| Model 2 |
OpenVMS |
833 MHz |
10 |
1 GB/8 MB |
DY-64CAA-DA |
| Model 2 |
OpenVMS |
833 MHz |
10 |
2 GB/8 MB |
DY-64CAA-EA |
| Model 2 |
OpenVMS |
833 MHz |
10 |
4 GB/8 MB |
DY-64CAA-FA |
|
|
|
|
|
|
| AlphaStation ES40 Systems |
| Model
1 |
Tru64
UNIX |
667
MHz |
6 |
512
MB/8 MB |
DA-62BAA-BW |
| Model
2 |
Tru64
UNIX |
667
MHz |
10 |
512
MB/8 MB |
DA-64BAA-CW |
| Model 2 |
Tru64 UNIX |
833 MHz |
10 |
512 MB/8 MB |
DA-64CAA-CW |
| Model
1 |
OpenVMS |
667
MHz |
6 |
512
MB/8 MB |
DY-62BAA-BW |
| Model
2 |
OpenVMS |
667
MHz |
10 |
512
MB/8 MB |
DY-64BAA-CW |
| Model 2 |
OpenVMS |
833 MHz |
10 |
512 MB/8 MB |
DY-64CAA-CW |
|
|
Options |
|
| Configuring Information |
- CCMHB-BA hub expansion box provides additional slots for up to eight fiber optic
connections. Two standard length single-mode fiber optic cables are available from Compaq (BN34R-10 and BN34R-31); however, users normally provide
this fiber optic connection. Fiber optic connectivity is completely transparent to the
systems using it and has no performance impact.
|
|
|
| June
12, 2002 - From Version 46
to 47 |
|
Changed |
|
Changes applied to Canada QuickSpec only. |
| June
4, 2002 - From Version 45 to
46 |
|
Changed |
|
| Options |
| Step 10 -
Storage Adapters/Controllers - Required if StorageWorks
shelf is selected in Step 5 |
| NOTE:
Refer to the following chart when configuring adapters, shelves, and disks. |
| AlphaServer ES40 Configuration
Chart for Storage Adapters |
|
| Storage Adapters |
Shelf |
Disk
Drive |
Tru64
UNIX |
OpenVMS |
| 3X-KZPCA-AA |
BA610-6D
DS-SSL14-Rx
DS-SL13R-xx |
3R-A0xxx-AA
1-inch Universal
3R-A1xxx-AA 1-inch Universal
3R-A3xxx-AA 1-inch Universal |
V4.0F
or higher |
V7.2-1
or higher |
| 3X-KZPEA-DB |
BA610-6D
DS-SSL14-Rx |
3R-A0xxx-AA
1-inch Universal
3R-A1xxx-AA 1-inch Universal
3R-A3xxx-AA 1-inch Universal |
V5.1A
only |
V7.2-2
or higher |
| 3X-DEPVZ-AA |
DS-SL13R-xx |
3R-A1xxx-AA
1-inch Universal |
V4.0F
with NHD2 or higher |
V7.1-2
or higher |
| KZPCM-DA |
BA36R-xx |
DS-RZ1ED-VW,
DS-RZ1FC-VW |
V4.0F
or higher |
V7.2-1
or higher |
| 3X-KZPBA-CC |
BA36R-xx |
DS-RZ1ED-VW,
DS-RZ1FC-VW |
V4.0F
or higher |
V7.2-1
or higher |
| NOTE:
Ethernet adapter is not required if 3X-DEPVZ-AA or KZPCM-DA is selected as SCSI adapter
for StorageWorks shelf. |
| Controllers |
Shelf |
Disk
Drive |
Tru64
UNIX |
OpenVMS |
| KZPAC-AA/CA/CB |
BA36R-xx |
DS-RZ1DD-VW
|
V4.0F
or higher |
V7.2-1
or higher |
| DS-KZPCC-AC/CE |
BA36R-xx * |
DS-RZ1ED-VW
DS-RZ1FC-VW |
V4.0F
or higher |
Not
supported |
| Step 10 -
Storage Adapters/Controllers - Required if StorageWorks
shelf is selected in Step 5 |
| RAID Controllers |
|
Maximum
# Supported |
|
|
Tru64 UNIX |
OpenVMS |
|
| PCI 1-port
UltraSCSI RAID controller with 4-MB cache memory (uses one PCI slot), includes RAID Array
230/Plus Subsystem software and documentation kit; includes VHDCI female connector; tape
drives not supported; only 9.1-GB disk drives supported, requires BN37A-xx cable (.3 to 20
m) to connect to single-ended UltraSCSI shelf |
4 |
4 |
KZPAC-AA |
| PCI 3-port
UltraSCSI RAID controller with 4-MB cache memory (uses one PCI slot), includes RAID Array
230/Plus Subsystem Software and documentation kit; tape drives not supported; only 9.1-GB
disk drives supported; SCSI cable required for each active port; requires BN37X-xx cable
(.3 to 20 m) to connect to single-ended UltraSCSI shelf, and BN31K-0E for external third
port connection |
4 |
4 |
KZPAC-CA |
| Same as KZPAC-CA with 8-MB cache
memory |
4 |
4 |
KZPAC-CB |
| Cache battery backup for KZPAC
controller |
|
|
KZPSC-UB |
| Step 16 -
Keyboards, Power Cords, Documentation |
| Step 16a -
Keyboards - Required for all non-North American systems |
| Tower and
Pedestal Power Cords |
- Pedestal systems ordered in North America include two 120V power cords; selection of two
country-specific power cords is mandatory for all non-North American systems.
|
|
|
North American 120 V, 75-inch |
BN26J-1K |
|
Australia, New Zealand, 2.5-meter |
103541-011
(U.S./Canada orders) |
|
|
BN19H-2E
(Other country orders) |
|
Central Europe, 2.5-meter |
BN19C-2E |
|
Denmark, 2.5-meter |
103541-481
(U.S./Canada orders) |
|
|
BN19K-2E
(Other country orders) |
|
Egypt, India, South Africa,
2.5-meter |
103541-AR1
(U.S./Canada orders) |
|
|
BN19S-2E
(Other country orders) |
|
Israel, 2.5-meter |
BN18L-2E |
|
Italy, 2.5-meter |
103541-461
(U.S./Canada orders) |
|
|
BN35M-02
(Other country orders) |
|
Japan, 2.5-meter |
3X-BN46F-02 |
|
Switzerland, 2.5-meter |
103541-511
(U.S./Canada orders) |
|
|
BN19E-2E
(Other country orders) |
|
UK, Ireland, 2.5-meter |
BN19A-2E |
|
| May
24, 2002 - From Version 44
to 45 |
|
Changed |
|
Removed
- COMPAQ - from the Overview and Options sections. |
|
Options |
|
Changed
" to -inch throughout the Options section. |
|
|
|
| Step 10 -
Storage Adapters/Controllers - Required if StorageWorks
shelf is selected in Step 5 |
|
|
|
Maximum #
Supported |
|
|
Tru64 UNIX |
OpenVMS |
|
PCI 2-port PCI to Ultra3, 64-bit
LVD SCSI adapter, uses one PCI slot; includes internal 68-pin and external 68-pin HD
connectors; requires BN38C-xx cable to connect adapter to Universal shelf; supports shared
JBOD using Models 4314R and 4354R Universal shelves; support restricted to EV68 833-MHz
systems only and Tru64 UNIX V5.1A as a minimum. No tape support. See
Step 14 for graphics restrictions.
OpenVMS V7.2-2 requires:
- DEC-AXPVMS-V722_FIBRE_SCSI-V0100-4.PCSI TIMA kit
OpenVMS V7.3 requires:
- DEC-AXPVMS-V73_FIBRE_SCSI-V0100-4.PCSI TIMA kit |
4 |
4 |
3X-KZPEA-DB |
|
|
PCI to 2-Gbit Fibre Channel
adapter, 64-bit, single-channel (uses one PCI slot)
NOTE: When used in standalone or
TruCluster environment (with Fibre Channel Switches, Step 11), a maximum of six adapters
is supported. Arbitrated loop is not supported.
Tru64 UNIX V 5.1 requires Patch Kit:
T64V51B18AS0004-20011114.tar |
See Note |
See Note |
DS-KGPSA-DA
(26139-B21) |
|
|
| Step 11 -
Storage Devices - Optional |
|
|
|
|
Fibre Channel SAN 2-GB switch -
16-port
- requires Tru64 UNIX V5.1A Patch Kit: T64V51AB01AS0001-20020116.tar
- requires Tru64 UNIX V5.1 Patch Kit: T64V51AS0003-20010521.tar |
287055-B21
(U.S./Canada orders) |
|
|
|
|
DS-DSGGD-BA
(Other country orders) |
|
|
| |
| Step 14 -
Graphics Adapters - Optional |
|